Raymarine forum / Raymarine Forums / General Discussions v / Seatalk Fail / SmartPilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk Fail / SmartPilot
09-20-16, 01:18 AM
Post: #9
tondelayo_29 Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2016
Reputation: 0
RE: Seatalk Fail / SmartPilot
I caught a touch of the flue this weekend and didn't accomplish much but I did do some voltage checks at the Seapilot terminals. The results are listed below....

Voltage at Terminals
Fluxgate
Red 2.47
Green 2.47
Yellow 2.47
Blue 0.00 No Reading

Rudder
Red 4.8
Green 0.00 No Reading
Blue 2.37

Seatalk
Red 12.69
Yellow 0.42

Seatalk UN-USED
Red 12.69
Yellow 10.75

My course computer is the S3 version... Would it be a logical swap to a X5 as a replacement? This in lieu of sending the S3 in for diagnostics and possible repair keeping in mind I wish to upgrade navigation systems to the 9 series.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Seatalk Fail / SmartPilot - tondelayo_29 - 09-20-16 01:18 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication