Raymarine forum / Raymarine Forums / Product Selection Assistance v / Upgrades to Existing Raymarine System on B35.5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrades to Existing Raymarine System on B35.5
06-13-17, 10:12 AM
Post: #19
Tnauck Offline
Junior Member
**
 		Posts: 15
Joined: Mar 2016
Reputation: 0
RE: Upgrades to Existing Raymarine System on B35.5
Chuck, I think I've found the cause of the problem - two broken pins in the backbone connection on the 5 way connector connecting to the converter. They appear to be broken off in the backbone cable plug. I assume the 5 way connector must be replaced. Can the cable be repaired, or is that a replacement too? Thanks again for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Upgrades to Existing Raymarine System on B35.5 - Tnauck - 06-13-17 10:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication