The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Autopilot to mfd

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot to mfd
01-11-17, 08:57 PM (This post was last modified: 01-12-17 09:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
anovey Offline
Junior Member
**
 		Posts: 2
Joined: Jan 2017
Reputation: 0
Autopilot to mfd
I am having a couple of issues with my Raymarine system. The system was installed here in Panama and had been working fine till the autopilot control head died. The system consists of 2-e125's (MFD's), 1 CP370 sounder module with 1000 kw transducer, ev200 autopilot with P70r control head. The problem started with the control head started not turning on. I could control the autopilot with the MFD's but I had to send the p70r back to Raymarine so I unplugged the p70r and sent it back. Now the MFD cannot find the pilot at all. Is there a reason for the MFD to not be able to find the pilot? I did not cap the connector to the p70r and that is the only thing I can think of.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot to mfd - anovey - 01-11-17 08:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication