Rudder Position Sensor - M81105

[Hello Below]

Your information defines the physical limits of the Rudder Reference Transducer Arm. This is very useful. Thank you very much for that.

There (hopefully) should never be a time when it would be necessary for the autopilot to drive my rudder greater than +/- 30° under normal circumstances other than tacking/gybing.

The transducer will be connected to my existing Smart Pilot X-5 Wheel. After reading the SPX-5 Setup Guide I believe this will work very well if my rudder mechanical end stops are less than +/- 45° (or 90° stop to stop). And I believe this is the case.

Thanks again for your continued assistance.