European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Another SeaTalk 1 system upgrade.
|
|
02-09-17, 06:35 PM
(This post was last modified: 02-10-17 09:21 AM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
|
RE: Another SeaTalk 1 system upgrade.
I checked software:
e125 v17.46-00404 Converter 2.03 SPX10 v3.05 I believe that these are all current versions. The only update I had to install was for the SPX10 which was previously V3.00. I have confirmed that the SeaTalkNG power switch on the SPX10 is in the OFF position. LEDs on the unit are working. The SeaTalk 1 cable that previously connected the SPX10 and ST6001 has been disconnected at both ends. I have attached a network diagram. The MFD sees the SPX10 and I am able to control it using the autopilot control feature of the MFD. The "AUTO" and "STANDBY" buttons on the ST6001 actually seem to work, but the display still says NO PILOT and when the pilot is engaged the 1 and 10 buttons don't do anything. The RS125 GPS antenna is working and is recognized by the MFD so the SeaTalk 1 bus is functioning. |
|||
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)