Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Depth finder
02-14-17, 02:36 PM (This post was last modified: 02-14-17 02:37 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Depth finder
Welcome to the Raymarine Forum Ub2m4,

It is possible that you own an e97 MFD? If so, then please note that the ax7/cx7/e7D/eSx7 MFDs are compatible with any of the transducers found here. The only compatible fishfinder transducer which Raymarine had offered for these MFDs which had only supported 200kHz was the P48 fanbeam transducer. The P48 transducer was primarily designed for operation in relatively shallow inland waters such as that found within a river or shallow lake / pond. Fishfinding products will typically not be able to report depth when operating in water which has a depth of less than 3' below the transducer. The A102138 P58 would typically be recommended for those owning an ax7/cx7/e7D/eSx7 MFD, seeking a transom mounted transducer, and fishing in the range of depths specified.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Depth finder - Ub2m4 - 02-14-17, 01:46 PM
RE: Depth finder - Chuck - Raymarine - Moderator - 02-14-17 02:36 PM
RE: Depth finder - Ub2m4 - 02-14-17, 04:56 PM
RE: Depth finder - Ub2m4 - 02-15-17, 04:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)