Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Triducer compatibility
03-17-17, 09:01 AM
Post: #1
Triducer compatibility
Dear Sr, I have a DSM 30 Sonar module and recently I bought a new triducer pn#A66090 but the connector is not the same as the old one, is there any adaptor to solve this ?
New sensor tag: 31-668-2-01
Old sensor tag : 31-669-1-0
Regards
Luiz Dancini
Find all posts by this user
Quote this message in a reply
03-21-17, 12:05 PM (This post was last modified: 03-21-17 12:07 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Triducer compatibility
Welcome to the Raymarine Forum Luiz,

Raymarine offers three different versions of the B744V transducer (for ax7/cx7/e7D/ex7/eSx7 MFDs & Ax5 MFDs, CP370/DSM30/300/250 Digital Sounder Modules, and instruments/iTC-5). The A66090 version of the B744V is designed to be mated to the transducer socket of an ax7/cx7/e7D/ex7/eSx7 MFD. This version of the B744V transducer may be adapted for use with a DSM30/300/250 via an A80344 Transducer Adapter (also goes by the part number 33-562-01). The A66091 version of the B744V is designed to be mated to the transducer socket of a CP370/DSM30/300/250 Digital Sounder Module.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us