Raymarine forum / Raymarine Forums / Product Selection Assistance v / Axiom Transducer Selection

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom Transducer Selection
03-27-17, 08:25 AM (This post was last modified: 03-27-17 08:28 AM by Chuck - Raymarine - Moderator.)
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom Transducer Selection
a7ewizard,

Q. Assume I purchase the Axiom 9 RV with a transom mount 3D transducer. How do I also connect a traditional 60/200 transducer to it?
A. Please click here to view a FAQ addressing this subject. Specifically, an A80491 Axiom RV to 25-pin RV & 7-pin Embedded Transducers Y-Cable would be used to interface an Axiom RV MFD to both a RealVision 3Dâ„¢ transducer and to an ax7/cx7/e7D/ex6/eSx7 MFD compatible transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom Transducer Selection - JPA - 03-18-17, 07:08 PM
RE: Axiom Transducer Selection - JPA - 03-21-17, 03:50 PM
RE: Axiom Transducer Selection - Chuck - Raymarine - Moderator - 03-27-17 08:25 AM
RE: Axiom Transducer Selection - 2flit - 08-26-17, 07:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication