The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom and SeaTalk(1)
03-22-17, 09:29 AM
Post: #1
Axiom and SeaTalk(1)
I am contemplating buying a new Axiom 9 and Quantum radar for my boat and would like to know how I can use some of the components I already have in place.

Specifically, I have no need for a “fish finder”. Since I only need depth and temperature numbers I would like to use the depth and temperature transducers currently connected to my ST40 instruments. I have two ST40 displays, connected by SeaTalk(1). Can I connect the Axiom to the SeaTalk(1)? Is the “Raymarine SeaTalk(1) to SeaTalkng converter kit Part Number: E22158” the correct way to do this?

In the future I may want to connect additional NMEA2000 devices to the system. I see in the Seatalkng reference manual that NMEA2000 cannot be used if SeaTalk(1) is used (p.6 of Document 81300-1). Is there a way around this limitation?

Also please confirm that to use other (non-SeaTalk(1)) NMEA0183 devices I should use a bridge such as the Actisense NGW-1


Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom and SeaTalk(1) - npoduje - 03-22-17 09:29 AM
RE: Axiom and SeaTalk(1) - npoduje - 03-22-17, 07:44 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)