Seatalkng Power Connection

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Seatalkng Power Connection

03-08-16, 03:27 PM (This post was last modified: 03-08-16 03:57 PM by Chuck - Raymarine - Moderator.)

Post: #7

mswanicke Offline

Junior Member

Posts: 34
Joined: Mar 2016
Reputation: 0

RE: Seatalkng Power Connection

In sizing my wire runs I am using the following max loads for these devices.

ACU-100 10amps
SeaTalkng 5amps
E7D 7amps.

Assuming my wire run is 15ft for positive, 15ft for negative = 30ft total circuit.
Wire sizes for cable runs would be...

ACU-100 10AWG
SeaTalkng 12AWG
E7D 10AWG
Ground wire 10AWG

Fuse size at the panel for positive cable would be the same as max loads above.

Does this sound correct?

« Next Oldest | Next Newest »

Messages In This Thread

Seatalkng Power Connection - mswanicke - 03-03-16, 04:07 PM

RE: Seatalkng Power Connection - Chuck - Raymarine - Moderator - 03-03-16, 04:34 PM

RE: Seatalkng Power Connection - mswanicke - 03-08-16, 01:24 PM

RE: Seatalkng Power Connection - Chuck - Raymarine - Moderator - 03-08-16, 02:11 PM

RE: Seatalkng Power Connection - mswanicke - 03-08-16, 02:25 PM

RE: Seatalkng Power Connection - Chuck - Raymarine - Moderator - 03-08-16, 03:12 PM

RE: Seatalkng Power Connection - mswanicke - 03-08-16 03:27 PM

RE: Seatalkng Power Connection - Chuck - Raymarine - Moderator - 03-08-16, 03:59 PM

User(s) browsing this thread: 1 Guest(s)