Raymarine forum / Raymarine Forums / Multifunction Displays v / a98 displays white screen when p90 auto is pushed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a98 displays white screen when p90 auto is pushed
03-06-16, 09:57 AM (This post was last modified: 03-08-16 11:28 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: a98 displays white screen when p90 auto is pushed
Welcome to the Raymarine Technical Forum Smokey73,

Raymarine has identified a fault within the LightHouse II software and has linked the reported problem to the Chart application's radar overlay feature When the radar overly feature has been left ON and the radar is either not transmitting or had been switched OFF, then this problem may occur. This problem has also been linked to the Autopilot Control Feature as you have indicated. The problem was quite intermittent and may occur with any of the supported types of cartography. This problem may be worked around by selecting HOME and then commanding the MFD to re-open the previously viewed page. The software corrections for this problem are expected to be included within the v16.xx software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: a98 displays white screen when p90 auto is pushed - Chuck - Raymarine - Moderator - 03-06-16 09:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication