[CA] [CA11] Seatalk expansion on my GS165

[safeandsoundinc]

One more question. Thru the seatalk buss, each item grabs power from the buss, (I also added a fusion link and camera) where in the chain can I switch power so the i50 and i70 display aren't on all the time. I have an "electronics" (that now only powers up the VHF) and "autopilot" power switch.

One more question: I also added a CAM200iP and a Fusion radio (via STng adapter) and in testing a came up with a power on/off problem. As soon as anything on the backbone gets battery power, the i70 and i50 power up (even without the GS165 plugged in). The original setup has a dash switch labeled "autopilot" (which works fine) and another for "electronics" which now only powers up the VHF. How can I get the GS165, i70, i50 and CAM200iP to power up from the electronics switch? Or is there a different option you recommend.

Thanks again.