Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer RV 220 pair
07-14-17, 04:07 PM (This post was last modified: 07-14-17 04:09 PM by Dave - Raymarine - Moderator.)
Post: #10
RE: Transducer RV 220 pair
Hello ReelAttitudeBDA,

You will need to setup the two AXIOM displays on the same Raynet network.

To do this, you will need two Raynet(F) to Raynet(F) cables and one HS5 network switch. Both displays will be connected to the HS5 network switch via one Raynet(F) to Raynet(F) cable each. You can view information about the HS5 network switch Here.

Once the AXIOM displays are on the same network, you will be prompted to select a "Datamaster" display. At that point, choose whichever display you would like to be your main display. Once a datamaster has been selected, you will be able to view the RealVision information on either display in the FishFinder application.

- Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Transducer RV 220 pair - Dave - Raymarine - Moderator - 07-14-17 04:07 PM
RE: Transducer RV 220 pair - Ronnie - 08-31-17, 04:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us