Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HS5 + NMEA2K +
05-16-17, 10:28 PM (This post was last modified: 05-17-17 08:13 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: HS5 + NMEA2K +
OK...Now I am a bit confused. Only because everyone uses terms like SeatalkNG and NMEA2K interchangeably. And while the "data" is interchangeable for the most part, the connections are not.

1. Why would I not connect the RS150 GPS receiver to the HS5 switch? If I don't, it will require an adapter to connect it to the existing NMEA2K backbone since it is Raymarine SeatalkNG connectors at both ends. In the diagrams for the HS5 it appears to show the GPS receiver connected to the switch as well.

2. Did you mean to infer that I need a Separate Raymarine SeaTalkNG Backbone in addition to my existing NMEA2K Backbone?

3. Does the HS5 require a SeatalkNG Backbone in addition to the "powered" switch?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HS5 + NMEA2K + - Randar - 05-14-17, 09:16 AM
RE: HS5 + NMEA2K + - Randar - 05-15-17, 05:07 PM
RE: HS5 + NMEA2K + - Randar - 05-16-17 10:28 PM
RE: HS5 + NMEA2K + - Randar - 05-18-17, 05:16 AM
RE: HS5 + NMEA2K + - Randar - 05-18-17, 10:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)