Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
5000+ control head replacement options
05-18-17, 07:31 AM
Post: #1
5000+ control head replacement options
Are there other control heads that I can use to replace the 5000+ that I have which has dying LCD.
Find all posts by this user
Quote this message in a reply
05-18-17, 09:42 AM
Post: #2
RE: 5000+ control head replacement options
Welcome to the Raymarine Forum OviV,

Please note that the ST4000/ST4000+ and ST5000/ST5000+ combine the functions of an autopilot course computer and autopilot control head within a single device. Accordingly the ST5000+ alone could only be replaced with another ST5000+. Alternatively, a p70S Evolution Autopilot Control Head may be interfaced to the ST5000+ via an A06047 Adapter Cable to then permit the p70S to remotely control the ST5000+.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-24-17, 01:22 PM (This post was last modified: 05-24-17 01:46 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: 5000+ control head replacement options
Thank you Chuck. If my ST5000+ is already networked into my other components which include twin c95 screens, do I still have to connect the p70s directly to the ST5000+ or can I just connect it to the hs5 hub? Ideally I would love to control it with my c95 but apparently the autopilot controls are only available on the touch screens.

Ovi
Find all posts by this user
Quote this message in a reply
05-24-17, 01:50 PM
Post: #4
RE: 5000+ control head replacement options
OviV,

SeaTalkng and NMEA 2000 devices cannot be interfaced to a HS5 RayNet Network Switch. The p70S will need to be connected directly to the SeaTalk port of the ST5000+ via an A06057 400mm SeaTalk to SeaTalkng Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us