Raymarine forum / Raymarine Forums / Fishfinders v / DSM 300 Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 Issues
06-15-17, 08:46 PM
Post: #7
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
RE: DSM 300 Issues
Chuck -

I did not notice any messages for the DSM 300, but I'm not sure how to get at them. I did note the software version is 3.12. On and off was sporadic, but it seemed somewhat related to my shifting the cable feeds to the DSM input. I think it might be a good idea to remove the DSM 300, then open the shell to get at the connecters to make sure everything is tight.
Comments?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Issues - seeray96 - 06-06-17, 01:11 PM
RE: DSM 300 Issues - seeray96 - 06-13-17, 02:51 PM
RE: DSM 300 Issues - seeray96 - 06-14-17, 10:02 AM
RE: DSM 300 Issues - seeray96 - 06-15-17 08:46 PM
RE: DSM 300 Issues - seeray96 - 06-19-17, 08:40 PM
RE: DSM 300 Issues - seeray96 - 06-20-17, 09:47 AM
RE: DSM 300 Issues - seeray96 - 06-20-17, 12:08 PM
RE: DSM 300 Issues - seeray96 - 06-27-17, 01:54 PM
RE: DSM 300 Issues - seeray96 - 06-28-17, 12:03 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 12:50 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 03:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication