Raymarine forum / Raymarine Forums / Fishfinders v / DSM 300 Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 Issues
06-19-17, 02:11 PM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: DSM 300 Issues
seeray96,

Per my earlier response, I had requested that you configure the MFD to display a Fishfinder application page or pane. Should you hold the MFD's PAGE button pressed for approximately two seconds, the Select Page Set dialog will be displayed, permitting you to change page sets to one which includes the Fishfinder application. This page should be observed for any messages reported when the reported issue occurs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Issues - seeray96 - 06-06-17, 01:11 PM
RE: DSM 300 Issues - seeray96 - 06-13-17, 02:51 PM
RE: DSM 300 Issues - seeray96 - 06-14-17, 10:02 AM
RE: DSM 300 Issues - seeray96 - 06-15-17, 08:46 PM
RE: DSM 300 Issues - Chuck - Raymarine - Moderator - 06-19-17 02:11 PM
RE: DSM 300 Issues - seeray96 - 06-19-17, 08:40 PM
RE: DSM 300 Issues - seeray96 - 06-20-17, 09:47 AM
RE: DSM 300 Issues - seeray96 - 06-20-17, 12:08 PM
RE: DSM 300 Issues - seeray96 - 06-27-17, 01:54 PM
RE: DSM 300 Issues - seeray96 - 06-28-17, 12:03 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 12:50 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 03:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication