Command Link interface
|
06-28-17, 03:14 PM
Post: #2
|
|||
|
|||
RE: Command Link interface
Welcome to the Raymarine Forum Angler Management,
Please click here to view a FAQ addressing this subject. As you have suggested an engine gateway must be installed between the engine system (Command Link) backbone and the SeaTalkng / NMEA 2000 backbone to which the Axiom MFD has been interfaced. Raymarine recommends that the ECI-100 Engine Gateway be used for this purpose. More information about interfacing the ECI-100 Engine Gateway with Yamaha engines may be found here. As indicated within the referenced information a Raymarine Yamaha Link Cable (E70242) will be used to interface the Command Link system to the ECI-100. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Command Link interface - Angler Management - 06-28-17, 01:50 PM
RE: Command Link interface - Chuck - Raymarine - Moderator - 06-28-17 03:14 PM
RE: Command Link interface - Angler Management - 06-28-17, 04:07 PM
RE: Command Link interface - Chuck - Raymarine - Moderator - 06-29-17, 08:24 AM
RE: Command Link interface - Angler Management - 07-18-17, 12:43 AM
RE: Command Link interface - Chuck - Raymarine - Moderator - 07-18-17, 08:04 AM
RE: Command Link interface - Angler Management - 07-18-17, 10:12 AM
RE: Command Link interface - Chuck - Raymarine - Moderator - 07-18-17, 10:37 AM
RE: Command Link interface - steaua1986 - 08-10-17, 11:08 AM
RE: Command Link interface - Chuck - Raymarine - Moderator - 08-14-17, 01:30 PM
RE: Command Link interface - Angler Management - 08-14-17, 01:48 PM
RE: Command Link interface - Chuck - Raymarine - Moderator - 08-14-17, 03:27 PM
|
User(s) browsing this thread: 1 Guest(s)