Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
10-15-18, 03:46 PM (This post was last modified: 10-15-18 03:57 PM by Chuck - Raymarine - Moderator.)
Post: #11
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
I have a C90W chartplotter and would like to interface the AIS output from a GX2200. Will these same instructions work?

Thanks
Find all posts by this user
Quote this message in a reply
10-16-18, 12:36 PM
Post: #12
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
Welcome to the Raymarine Forum Dave,

The instructions previously supplied for interfacing the MFD to the VHF radio / AIS receiver via NMEA 2000 communications apply to the C/E-Series Widescreen MFDs as well. Please note that it is alternatively possible to interface the C/E-Series Widescreen MFD to the VHF radio / AIS receiver via the MFD's NMEA 0183 Port 2 to support bidirectional communications between the VHF radio / AIS receiver.
- connect the MFD's NMEA 0183 OUT2+ (orange/yellow) lead to the NMEA 0183 IN+ (blue) lead of the GX2200
- connect the MFD's NMEA 0183 OUT2- (orange/brown) lead to the NMEA 0183 IN- (green) lead of the GX2200
- connect the MFD's NMEA 0183 IN2+ (orange/white) lead to the NMEA 0183 OUT+ (gray) lead of the GX2200
- connect the MFD's NMEA 0183 IN2- (orange/green) lead to the NMEA 0183 OUT- (brown) lead of the GX2200
- Configure the GX2200's NMEA DATA IN/OUT setting to 38400 BPS.
- Configure the MFD's NMEA 0183 Port 2 Setting (HOME->SET-UP->SYSTEM SETTINGS->NMEA SET-UP->NMEA INPUT PORT 1) to AIS 38400.
- To view AIS objects within the MFD's Chart application, configure the AIS overlay to ON.
Visit this user's website Find all posts by this user
Quote this message in a reply
10-18-18, 06:26 PM
Post: #13
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
Thank you for this very helpful reply.
Find all posts by this user
Quote this message in a reply
10-19-18, 07:51 AM
Post: #14
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us