The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Radar Source Not Found on Split Screen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar Source Not Found on Split Screen
07-19-17, 02:41 PM
Post: #1
camelot Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
Radar Source Not Found on Split Screen
We have a newly installed Raymarine MFD (aSeries). Both chart and radar seem to work fine on single pages (and as an overlay). However, when viewed on a split screen, every attempt to power up the radar results in an error message "No Radar Source Found." Any suggestions?

Also, our 20-year-old Raytheon calculated ETA to waypoint. Anyway to get that data displayed in a databox? Currently databoxes are set up to display SOG, COG, and DTW. I can certainly calculate ETA from those, but having it displayed for me would be nicer!

Thanks in advance.

Camelot
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Radar Source Not Found on Split Screen - camelot - 07-19-17 02:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication