Raymarine forum / Raymarine Forums / Product Selection Assistance v / Which chartplotter for Navionics Dock-to-Dock and ST1000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which chartplotter for Navionics Dock-to-Dock and ST1000
07-31-17, 01:27 PM (This post was last modified: 07-31-17 01:28 PM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Which chartplotter for Navionics Dock-to-Dock and ST1000
Judy,

While it is recommended that the Micro-Talkâ„¢ Wireless Gateway be used achieve maximum performance with a system of TackTick instruments, it would also be possible to interface the NMEA 0183 output terminals of the T122 Wireless Interface to one set of NMEA 0183 input leads of any e/eS/gS-Series MFD (including the e7 MFD which you have referenced), a9x MFD, or a12x MFD to supply the MFD with wind, speed through water, depth, and water temperature data.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Which chartplotter for Navionics Dock-to-Dock and ST1000 - Chuck - Raymarine - Moderator - 07-31-17 01:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication