Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom 7 RV Software update 3.1.96 issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 RV Software update 3.1.96 issue
08-19-17, 11:23 AM (This post was last modified: 08-21-17 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #3
jmcjmc817 Offline
Junior Member
**
 		Posts: 13
Joined: Feb 2016
Reputation: 0
RE: Axiom 7 RV Software update 3.1.96 issue
I still cannot click on the "none" button, even though I'm getting readings from the transducer. The label on the cable says: 50/200 12/00 E66020 31-231-8-01 Rev 01 Pat# 4898029 &5186050

All the other tabs on the configuration page allow me to change those settings.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Axiom 7 RV Software update 3.1.96 issue - jmcjmc817 - 08-19-17 11:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication