Raymarine forum / Raymarine Forums / Multifunction Displays v / A7 (NG) MFD reboots when connect to SeaTalk Network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A7 (NG) MFD reboots when connect to SeaTalk Network
10-09-17, 10:21 AM (This post was last modified: 10-09-17 10:21 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A7 (NG) MFD reboots when connect to SeaTalk Network
Mickey,

Under rare instances do we support backfeeding a SeaTalkng backbone via a SeaTalk to SeaTalkng Converter ... this is typically limited to system featuring a backbone consisting of no more than a couple of SeaTalkng devices and the owner has no future intentions to expand the SeaTalkng / NMEA 2000 backbone to include additional devices. You may find the FAQ addressing this subject here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: A7 (NG) MFD reboots when connect to SeaTalk Network - Chuck - Raymarine - Moderator - 10-09-17 10:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication