Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom software update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom software update
11-14-17, 10:48 AM (This post was last modified: 11-14-17 12:00 PM by Chuck - Raymarine - Moderator.)
Post: #11
wdbox Offline
Junior Member
**
 		Posts: 11
Joined: Oct 2017
Reputation: 0
RE: Axiom software update
I think that I have finally got it. Just to be sure before I start spending and cutting up my panel.
Once I install the RCR-SDUSB reader than I can install the Navionics card in the reader instead of the MFD and my charts will display normally. For software updates I would remove the Navionics card and install the update card in the reader which will update both MFD's. Once the update is finished, I would reinstall the Navioics card and resume normal operation.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom software update - wdbox - 11-01-17, 02:58 PM
RE: Axiom software update - wdbox - 11-02-17, 03:42 PM
RE: Axiom software update - wdbox - 11-05-17, 10:45 AM
RE: Axiom software update - wdbox - 11-08-17, 10:43 AM
RE: Axiom software update - wdbox - 11-13-17, 08:17 AM
RE: Axiom software update - wdbox - 11-14-17 10:48 AM
RE: Axiom software update - wdbox - 11-15-17, 01:48 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication