Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
hs to ng network
11-26-17, 12:33 PM
Post: #1
hs to ng network
I picked up an SR100 and would like to network it to my c127. I am looking for the most economical approach which should be just getting the right cable. My guess at the right cable has a yellow connection to the network. All of my connectors are blue and white. Why the color difference? Please itemize by part # what I need to complete this connection just to make sure I am looking at the right one.
Thank you.
Find all posts by this user
Quote this message in a reply
12-01-17, 08:36 AM (This post was last modified: 12-01-17 08:38 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: hs to ng network
Welcome to the Raymarine Forum SallySea,

There is only one way to interface a SR150, SR6, or SR100 to an a/c/e/eS/gS-Series MFD ... via Ethernet communications (not SeaTalkng, SeaTalk, NMEA 2000, or NMEA 0183). As the Ethernet Network socket of the MFD and SR100 feature different socket styles, some adaptation is required. Should one of the MFD's Ethernet Network sockets not be in use, then the simplest method of interface these two products to one another would be via a cable assembly constructed from an A80272 RayNet (M) Pins to SThs (M) Socket Adaptor Cable and an appropriate length of RayNet (F) to RayNet (F) Cable. However, should all of the MFD's Ethernet Network sockets be in use, then the MFD would need to be interface to an A80007 HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable. The SR100 in turn would be interfaced to the HS5 RayNet Network Switch via the cable assembly constructed from an A80272 RayNet (M) Pins to SThs (M) Socket Adaptor Cable and an appropriate length of RayNet (F) to RayNet (F) Cable referenced above.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us