Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Propagate MFD alarm
12-07-17, 06:34 PM (This post was last modified: 12-08-17 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Propagate MFD alarm
I have an ES97 MFD. I need to propagate the MFD alarms to a buzzer inside the boat in order to hear e.g. the anchor drift alarm from the cabin. Based on the ES97 wiring diagram it does not seem there is an audio out connection, and the HDMI connection is video only. I thought I could capture the alarm tag on the bus with a programmable device that would provide an on/off output. Is there something like this available, or anyone knows a better solution? (I would not want to buy another MFD)
Find all posts by this user
Quote this message in a reply
12-08-17, 09:33 AM
Post: #2
RE: [CA] Propagate MFD alarm
Welcome to the Raymarine Forum Sergio,

Unfortunately the a/c/e/eS-Series MFDs and Axiom MFDs neither feature an audio output port, nor do the feature alarm leads which may be used to trigger an external alarm. The only solution available is that which may be found within the FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us