Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Help please! Dragonfly 7 Pro Transducer Mounting
12-13-17, 02:49 PM
Post: #2
RE: [CA] Help please! Dragonfly 7 Pro Transducer Mounting
Welcome to the Raymarine Forum BBS163,

I wouldn't expect that mounting the transducer bracket in the manner which you have suggested would adversely affect the imaging performance of the transducer when operating at typical fishing speeds (i.e. speeds below plane). However, mounting the transducer in the manner suggested would limits its swing within the bracket. Should the transducer not be able to kick up if it hits an obstruction, then damage may be caused to the transducer and/or its bracket. Additionally, the photo also appears to show that the transducer will be mounted 3/4" or more below that of the hull bottom forward of the transducer.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Help please! Dragonfly 7 Pro Transducer Mounting - Chuck - Raymarine - Moderator - 12-13-17 02:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us