[CA] e125 Display Issues

[lwitty]

Thanks Chuck.

While the e125 continued to work normally for a few weeks, the display issues/symptoms returned while connected to shore power at my dock. I left the unit on for approx 1 hour and the display issues cleared up and it was operating normally.

I sent the unit back for warranty repair and expect it to arrive at the repair center tomorrow. Notification number is 30339369. I have sent a video with the unit on a USB stick (too large to post here) showing the display issues if needed.

This is the same e125 that I have an unresolved issue with heading versus COG as described in this post (http://forum.raymarine.com/showthread.php?tid=3307 ) in case there is any link (please note that I had this heading vrs COG issue with the old auto pilot which was an S3 with flux gate then replaced with a new autopilot with EV1 and had the same issue - thus I'm wondering if it could be the e125 somehow impacting the seatalk messages).

Thanks