Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Navionics Platinum+ maps shared between Axiom displays?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics Platinum+ maps shared between Axiom displays?
12-22-17, 12:55 PM (This post was last modified: 12-22-17 12:57 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Navionics Platinum+ maps shared between Axiom displays?
Welcome to the Raymarine Forum Tony,

Cartography sharing among MFDs requires that the MFDs be interfaced to one another via an Ethernet communications network. Should this be the case onboard your own boat, then please ensure that you have use the Chart Selection feature within the affected MFD's Chart application page/pane to specify the cartography which will be displayed within the Chart application page/pane being viewed. If so and should the problem persist, then please be aware that Raymarine has received some reports of failure to share cartography among Axiom / Axiom Pro MFDs which have been interfaced in this manner. Raymarine is currently investigating the problem, with the current expectation that it may be resolved in time to be included within the upcoming v3.3.x software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Navionics Platinum+ maps shared between Axiom displays? - Chuck - Raymarine - Moderator - 12-22-17 12:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication