Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Navionics Platinum+ maps shared between Axiom displays?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics Platinum+ maps shared between Axiom displays?
12-30-17, 02:10 PM (This post was last modified: 01-02-18 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #5
georgeobryan Offline
Junior Member
**
 		Posts: 6
Joined: Oct 2017
Reputation: 0
RE: [CA] Navionics Platinum+ maps shared between Axiom displays?
I too am now having this problem. I pulled my SD card to register and update it, which went smoothly. However, when I reinstalled the card the second Axiom 12 no longer has the chart detail that it had previous to the update ; before, it had the exact same detail as the primary Axiom 12. As a sidenote “Autorouting” is now working though.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Navionics Platinum+ maps shared between Axiom displays? - georgeobryan - 12-30-17 02:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication