Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Navionics Platinum+ maps shared between Axiom displays?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Navionics Platinum+ maps shared between Axiom displays?
08-13-18, 12:36 PM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Navionics Platinum+ maps shared between Axiom displays?
Welcome to the Raymarine Forum DRFASailboater,

Which version of LightHouse 3 software is presently installed within each of the MFD's? How have the MFD's been interfaced to one another
a) each as spurs to a powered and properly terminated NMEA 2000 backbone, or
b) via an Ethernet network (through a HS5 RayNet Network Switch? or via direct connection between the Axiom Pro MFD with each of the two Axiom MFDs?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Navionics Platinum+ maps shared between Axiom displays? - Chuck - Raymarine - Moderator - 08-13-18 12:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication