[TG] AXIOM Pro RVX with Marine Camera

[Tom - Raymarine - Moderator]

Hello jkspain,

I should probably just say for the record at the outset that the only IP video sources officially supported by Raymarine MFDs are Raymarine- and FLIR-branded models. Other cameras may or may not work, and the level of support we can give is limited compared to systems using Raymarine or FLIR cameras.

That being said:
All Raymarine Raynet/SeatalkHS networks use the IP range 10.A.B.C, where A is 0..31. Your camera(s) need to be set up as DHCP clients (dynamic IP) in order to receive a compatible IP within this range (don't try to set a static IP in this range as IP conflicts then become possible.)

If the cameras still fail to be detected by the MFD after this then I would guess that there is still a level of authentication enabled (there's a difference between zero-authentication and 'allow anonymous logins', for example, where the latter is likely to still need a username of 'anonymous'.) You can get some idea whether this is the case by trying to receive video in something like VLC Player (videolan.org) at a URL of rtsp://camera-ip-address:8554/camera_stream_id. The camera's web interface should help you find your camera's specific URL. If you can't see the video in VLC, you probably won't be able to on the MFD.

Regards,
Tom