Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RV Transducer(s) placement help
02-22-18, 10:49 AM (This post was last modified: 02-22-18 10:57 AM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA] RV Transducer(s) placement help
I went with the rv220. Once installed and used for a while I will post results.

Thanks for the help.
Find all posts by this user
Quote this message in a reply
02-22-18, 10:57 AM
Post: #12
RE: [CA] RV Transducer(s) placement help
You're welcome.
Find all posts by this user
Quote this message in a reply
08-15-18, 11:05 AM (This post was last modified: 08-15-18 11:38 AM by Chuck - Raymarine - Moderator.)
Post: #13
RE: [CA] RV Transducer(s) placement help
Update:

I have been using the system with the RV220 in this location:

http://forum.raymarine.com/attachment.php?aid=1623

and everything works as expected, I can hold bottom at approx 22-25kts in flat conditions. Thanks for the help in mounting location selection.

I do have one additional question. The boat came with an E66056 (airmar B744v) I noticed that when going offshore I lose bottom at around 600ft with the rv220. I would think the b744v would have greater depth range with 50khz selected. On the phone I was told there is a adapter to connect the transducer to one of my Axiom pro units (12" rvx and 12" S) but it would have to be connected to the rvx port. This does not make sense to me why would I not connect to the 1kw port?

Thanks
Find all posts by this user
Quote this message in a reply
08-15-18, 11:46 AM
Post: #14
RE: [CA] RV Transducer(s) placement help
Scott,

You have either been misinformed or have misunderstood the response to how the E66056 version of the B744V fishfinder transducer may be interfaced to an Axiom Pro RVX MFD. As you have suggested E66056 version of the B744V fishfinder transducer must either be adapted (part #A80496) to be mated to the Axiom Pro RVX MFD's 1kW Transducer socket or interfaced to a CP370 1kW 50kHz/200kHz Fishfinder Sounder Module which in turn will be interfaced to the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)