The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] Instrument Settings via Network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Instrument Settings via Network
03-21-18, 02:15 AM (This post was last modified: 03-22-18 02:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
rsqunit Offline
Junior Member
**
 		Posts: 37
Joined: Apr 2017
Reputation: 1
[CA] Instrument Settings via Network
I have a pair of Axiom Pros, a pair of P70s auto-pilot heads, and a couple of i70s units.

Is there a way for common settings for the i70s to be retrieved from the SeaTalkng network?

For example, I know that the units can be placed in a group that will let me control the display mode. I've done that.

However, the alarm settings and display options (pages, data, etc) configurations seem to have to be configured individually. Foe example, turning off the AIS alarms, or adding a new page.

Am I missing something or is shared configuration not possible on the i70s units like it is on a pair of Axiom Pros?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Instrument Settings via Network - rsqunit - 03-21-18 02:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication