Raymarine forum / Raymarine Forums / Radar v / [CA] RD424HD "No Radar Source Found"

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RD424HD "No Radar Source Found"
03-23-18, 08:48 AM (This post was last modified: 03-30-18 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] RD424HD "No Radar Source Found"
Welcome back to the Raymarine Forum GoodChance,

The method which you employed to interface a RJ45 terminated Digital Radar Cable to a RayNet (Ethernet) socked is correct. Please click here to view a FAQ addressing this subject. Should the problem not be resolved by cycling power (ON->OFF->ON) to the radome after the MFD has completed startup initialization. Should this and the other recommendations within the FAQ not identify a problem with power being supplied to radome end of the Digital Radar Cable or with the Ethernet communications leads of the Digital Radar Cable, then it would be recommended that the radome be sent to Raymarine's Product Repair Center.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] RD424HD "No Radar Source Found" - Chuck - Raymarine - Moderator - 03-23-18 08:48 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication