Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Axiom 9 Simulator mode

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Axiom 9 Simulator mode
03-27-18, 06:04 PM (This post was last modified: 03-28-18 07:46 AM by Chuck - Raymarine - Moderator.)
Post: #3
1851DC Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2016
Reputation: 0
RE: (DG) Axiom 9 Simulator mode
What size fuse should be used as I will be wiring this to a switch on the panel on my boat and was trying to find out what size fuse to use in my electric fuse panel?

Also would this be the same size fuse as using an in-line fuse off the boat while using the simulator mode and do I need to connect a transducer and cable if I am only using simulator mode?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) Axiom 9 Simulator mode - 1851DC - 03-25-18, 08:21 AM
RE: (DG) Axiom 9 Simulator mode - 1851DC - 03-27-18 06:04 PM
RE: (DG) Axiom 9 Simulator mode - olga - 11-16-18, 07:04 AM
RE: (DG) Axiom 9 Simulator mode - olga - 11-19-18, 05:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication