[CA] Connecting to ev1, mfd, transponder

[Chuck - Raymarine - Moderator]

Ahelbig,

Q1. Then connect the two backbones using the devicenet cable.
A1. We typically recommend that the SeaTalkng / NMEA 2000 backbone be constructed from a single manufacturer's NMEA 2000 networking components to maximize reliability of the SeaTalkng / NMEA 2000 backbone and to simplify any future expansion of the system. However, should you elect to proceed with joining two backbones, then an appropriate length of SeaTalkng Backbone Cable would be used for this purpose. Please click here to view a FAQ addressing how the two backbones may be joined using the SeaTalkng Backbone Cable. The backbone must be powered form a single switched 12VDC power circuit and the power insertion spur should be located at the approximate mid-point of the backbone's LEN load.