Raymarine forum / Raymarine Forums / Instruments v / [CA] iTC-5 as an interface to ST1 Displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] iTC-5 as an interface to ST1 Displays
04-20-18, 10:54 AM (This post was last modified: 10-15-18 09:16 AM by Chuck - Raymarine - Moderator.)
Post: #7
Brian_Vogelaar Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2017
Reputation: 0
RE: [CA] iTC-5 as an interface to ST1 Displays
Thanks Chuck, that's good news.
I have redrawn the sketch based on your latest input (now rev4).
Is it still okay to power the STng network as shown? So the ST1 network will still be powered from the Autopilot and the new STng network will be powered through the iTC-5?
In the future, I'm looking at replacing the E80 with an Axiom 9. Would the ST1 to STng converter be required then or would the Actisense still be necessary?

[Image: attachment.php?aid=1803]

Thanks again,
Brian
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] iTC-5 as an interface to ST1 Displays - Brian_Vogelaar - 04-20-18 10:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication