Raymarine forum / Raymarine Forums / Instruments v / [CA] iTC-5 as an interface to ST1 Displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] iTC-5 as an interface to ST1 Displays
04-23-18, 10:15 AM
Post: #9
Brian_Vogelaar Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2017
Reputation: 0
RE: [CA] iTC-5 as an interface to ST1 Displays
Understood and thanks again Chuck.
I noticed in the SeaTalkng Reference Manual that they describe using the ST70 as a bridging device to connect a ST1 network to a STng network. Is it safe to assume that the E80 Classic MFD and the ST70 work exactly the same in this regard? I included the diagram from the manual that I am referring to.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] iTC-5 as an interface to ST1 Displays - Brian_Vogelaar - 04-23-18 10:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication