[DG] Axiom 7 with Rv-100 transducer.

[ystaspinar]

Dear Derek,
Yesterdat I asked some questions but from yesterday to today I read a lot on the forum and I am confused.

I have an Axiom 7 MFD with RV-100 transducer. And I want to buy a Raymarine Airmar P66 Transducer. ( E66054)

Which cable should I buy for using P66 and RV-100 both together?

A80491 Y-Cable or The A80492 Y-Cable

Your previous post on my topic tells me to use the A80492 Y Cable

But in another topic I found a post

(05-21-19 11:41 AM)Chuck - Raymarine - Moderator Wrote:  Welcome back to the Raymarine Forum mannery,

The A80491 Y-Cable and A80492 Y-Cable are designed to permit an Axiom RV MFD to be simultaneously interfaced to a RV transducer / RV transducer pair and to a 50kHz/200kHz fishfinder transducer. The A80491 Y-Cable is designed for use with 600W fishfinder transducers which had been designed to be directly mated (i.e. no adapter cable) to the transducer socket of any of the following fishfinding products:
- ax7/cx7/e7D/ex7/eSx7 MFD; where x indicates screen size
- A50D/A57D/A70D MFD
- DSM25 fishfinder sounder module
- DS400X/DS500X/DS600X fishfinder
To view the compatible transducers, click here ... note the product ID listed for each transducer.

The A80492 Y-Cable is designed for use with 600W, 1kW, or 2kW fishfinder transducers which had been designed to be directly mated (i.e. no adapter cable) to the transducer socket of any of the following fishfinding products:
- CP370 fishfinder sounder module
- CP300 fishfinder sounder module
- DSM300 fishfinder sounder module
- DSM30 fishfinder sounder module
- DSM250 fishfinder sounder module
- L1250 fishfinder
- L760 fishfinder
- L755 fishfinder
To view the compatible transducers, click here ... note the product ID listed for each transducer.

The transducer name (ex. B319 B260, B744V, P66, P79, etc.) identifies a family of transducers rather than a single transducer, each of which is designed for a specific manufacturer and fishfinder or instrument product offered by that manufacturer. As such, the transducer's product ID(s) should be used in determining compatibility of the transducer with Raymarine's fishfinding products. Please click here to view a FAQ addressing this subject. Accordingly, it would be necessary to know your P79 transducer's product ID in order to specify which Y-cable may be required.

Here where I am confused.

Another question is; Ä°f I buy a A80489 Adapter cable, can I use P66 single with Axiom 7 without RV-100 ducer? Which way is sense? Single ducer or double ducer. I sent 2 shopping links on previous post. Can you please draw me a path for best performance of my MFD.