The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] E120 classic to evolution broken pin

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E120 classic to evolution broken pin
05-09-18, 05:56 PM (This post was last modified: 05-11-18 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
Tomhogan Offline
Junior Member
**
 		Posts: 1
Joined: May 2018
Reputation: 0
[CA] E120 classic to evolution broken pin
Hi. I have an E120classic classic I'm trying to connect with my new evolution acu200 and p70rs. The E120classic has a broken pin, in the Seatalk2 socket, I believe that it's the white can h location. When I connect to the stng back bone with a A06061 cable, the p70 says no data and the E120classic says no heading. Can I use the "Seatalk/alarm" or the "nema0183" sockets? I have an alarm out cable e55054 and a st-stng converter. I have a digital yacht Gps150 positioning sensor connected to the 0183 socket. Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] E120 classic to evolution broken pin - Tomhogan - 05-09-18 05:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication