[TG11] Wind 180 degrees off on Axiom 9

[mcintoshusa1@gmail.com]

I have a similar problem.

I have an Axion 9" display with the latest software upgrade (April 2019). My older ST60 wind instrument points correctly to apparent and true wind angles. I have recently reset the ST60 wind instrument and did the calibration doing the 2 circles which did flash and beep. I think it is working fine.

My Axiom MFD shows the wind direction on the screen but it is 60 degrees Off. The wind speed matches the St 60 display. I have changed the magnet to True north in the MFD and no changes.

My system consist of:
Axiom 9" (April 2019 upgrade)
ST 60 wind instrument
ST 60 Tridata istrument
ST 4000+ autopilot.

Any suggestions on how to get the wind display to point correctly on the MFD. I can make the adjustment on the ST 60 wind instrument to make the wind instrument be 60 degrees off and then the wind direction on the MFD will be correct?

Thanks