Raymarine forum / Raymarine Forums / Autopilots v / [CA11] SPX-DI0 and Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] SPX-DI0 and Axiom
05-17-18, 02:28 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] SPX-DI0 and Axiom
Welcome to the Raymarine Forum sbe008,

The SPX autopilot, along with any ST70 Autopilot Control Heads or ST70 Instruments must be updated with the latest software in order to support use with MFDs running LightHouse 3 software. In such cases where the currently installed MFD cannot be used to update the software within one's legacy products, it would be recommended that the device(s) by a Certified Raymarine Installer or sent to Raymarine’s Product Repair Center to have the software update(s) performed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SPX-DI0 and Axiom - sbe008 - 05-17-18, 02:14 PM
RE: [CA11] SPX-DI0 and Axiom - Chuck - Raymarine - Moderator - 05-17-18 02:28 PM
RE: [CA11] SPX-DI0 and Axiom - sbe008 - 05-17-18, 03:09 PM
RE: [CA11] SPX-DI0 and Axiom - sbe008 - 05-17-18, 05:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication