Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 2000 and Axiom 9
05-24-18, 08:25 PM (This post was last modified: 05-25-18 08:35 AM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] NMEA 2000 and Axiom 9
Chuck update. I reconfigured the backbone and installed the i70s this afternoon.

The data from both engines came right up on the i70s as Engine 1 (port) and Engine 2 (starboard). The pressures, temps and RPM matched.

I tried to identify the engines with the Axiom 9 and no luck. The same errors as before. I attached an image.

I now assume that the gateway is sending the correct data if the i70s is reporting it. I hope this helps you get closer to the issue with the Axiom not listening.

Let me know the next step?

Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] NMEA 2000 and Axiom 9 - will40 - 05-22-18, 05:04 PM
RE: [CA11] NMEA 2000 and Axiom 9 - will40 - 05-24-18 08:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)