Raymarine forum / Raymarine Forums / Instruments v / [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
05-29-18, 09:48 AM (This post was last modified: 06-04-18 11:54 AM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
Tim,

Please click here to view the FAQ addressing why data source selection may be blocked in some systems and how it may be overcome. Once so configured, it should only be necessary to specify data source selection via the MFD, which in turn will communicate source selection to the other devices within the system. It is recommended that the MFD's internal GPS be used as the systems's GPS as well as Date/Time Data Source selections. Again, once these settings have been configured within the MFD, there is no need to duplicate these settings commands within the other components of the Raymarine system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade - Chuck - Raymarine - Moderator - 05-29-18 09:48 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication