Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD will not recognize radar
08-03-17, 05:36 PM (This post was last modified: 08-04-17 07:44 AM by Chuck - Raymarine - Moderator.)
Post: #11
RE: MFD will not recognize radar
Just checked the power supply to the done and I've for 12.35 volts. When I plug the charger in I get 12.45 volts and still no recognition. Do you recommend I return it to raymarine?
Find all posts by this user
Quote this message in a reply
08-04-17, 07:47 AM
Post: #12
RE: MFD will not recognize radar
TeamBuckRogers,

Should you have connected the vessel to shore power/charger, permitted the vessel's batteries to be fully charged, and that after the vessel's batteries have been fully charged and while the vessel is still connected to shore power, tested the radome again, and the problem persists, then radome should indeed be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us