Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Raymarine EV-150 work with Vulcan 7FS
06-07-18, 10:15 AM (This post was last modified: 06-08-18 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine EV-150 work with Vulcan 7FS
Does anybody know if the Raymarine EV-150 will communicate with B&G Vulcan 7FS plotter?
Find all posts by this user
Quote this message in a reply
06-08-18, 03:37 PM
Post: #2
RE: [CA11] Raymarine EV-150 work with Vulcan 7FS
Welcome to the Raymarine Forum mbjezior,

Should the third party chartplotter have a NMEA 2000 communications interface then the third party chartplotter may be interfaced as a spur to the powered and properly terminated SeaTalkng / NMEA 2000 backbone which will interface the Evolution autopilot components to one another. Should the third party chartplotter have a NMEA 0183 communications interface then the third party chartplotter may be interfaced to a NMEA 0183 to NMEA 2000 data bridging device (ex. Actisense NGW-1-ISO-STNG) to which in turn would be interfaced as a spur to the powered and properly terminated SeaTalkng / NMEA 2000 backbone which will interface the Evolution autopilot components to one another.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us