Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] E70150 Masthead Transducer... forgot to put metal clip

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E70150 Masthead Transducer... forgot to put metal clip
06-14-18, 01:44 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E70150 Masthead Transducer... forgot to put metal clip
Welcome to the Raymarine Forum Mark,

Early production ST60 Short Arm Wind Transducers featured the metal clip which you have described. This clip was included to provide additional support for the transducer. The transducer's design has since been modified such that it no longer requires and accordingly is no longer shipped with this metal clip. Should your transducer have included this metal clip, it is recommended the the bosun's chair be removed from storage to then install the missing metal clip of your wind transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] E70150 Masthead Transducer... forgot to put metal clip - Chuck - Raymarine - Moderator - 06-14-18 01:44 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication