The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Depth alarm on i70s can only be set in steps of 1 meter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Depth alarm on i70s can only be set in steps of 1 meter
06-13-18, 04:12 PM (This post was last modified: 06-14-18 02:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
bhavers Offline
Junior Member
**
 		Posts: 12
Joined: Jun 2018
Reputation: 0
[DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi,
I just installed a i70s display and wanted to set a depth alarm to 1.4m. But i can only set the alarms to full meters (1, 2, 3, etc.).
Is there a possibility to set the alarm to the decimal level?

Its a nice display but a depth alarm on full meters will be practically unusable for many boats i guess.

If setting the alarm to the decimal level is not possible, will you consider building this in the next software version?

Kind regards,
Bram.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Depth alarm on i70s can only be set in steps of 1 meter - bhavers - 06-13-18 04:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication