[TG] [TG11] New Equipment information

[Tom - Raymarine - Moderator]

Hello Lance,

Assuming:
- you'll be connecting the Quantum over Wifi rather than wired, or buy the Quantum part with network cable supplied (T70243)
- you don't need an extension beyond the supplied 8m RV100 transducer cable (extensions are listed on the Accessories tab at http://www.raymarine.com.au/transducers/realvision/)
then no further cables are required for those products.

No, RV100 doesn't get speed-through-water. You'd need a separate transducer connected to the 1kW port on the Axiom Pro RVX. This could be a through-hull ST800/P120 type if you can fit it ([part E66071, http://www.raymarine.com.au/view/?id=12410) or a transom-mount P58 depth-speed-temp transducer (E66054). I'd recommend the latter because the price is fairly similar, you'd get a bonus 600W 50/200kHz fishfinder channel and you wouldn't have an unused connector on a speed/depth Y-cable (supplied with E66071) that would need to be covered/protected from corrosion.

The frequencies of all channels of the RV-class sounders are Chirp, so don't transmit on a single frequency. As such, they're not adjustable. What's the reason for wanting to adjust frequency?

Regards,
Tom